Online Catalogue | Camper / Motorhome Drive Away Awnings | Royal
Quantity:
A free standing awning suitable for camper vans and van based motorhome conversions More...
Plastic figure 8 channel for attaching awnings to guttering or kador 750mm long (Most awnings need either 3 or 4 pieces of this to suit)
Clamp with rubber lining for attaching awning to gutter using pole and clamp method
Double sided awning beading (3 Mtrs Long) for joining a free standing camper awning to your vehicle with figure 8 channel if your vehicle already has an awning rail fitted
Double sided awning beading (3 Mtrs Long) for joining a free standing camper awning to your Fiamma awning which has a smaller diameter channel and standard awning piping will not fit
3 x 1.2 mtr lengths of rail - can be fitted to T4 or T5 in the gutter on the roof by bonding in with sikaflex 512 or similar or screwed onto the sidecan also be fitted underneath poptop roof to keep out of site if your T4 or T5 has a poptop on it (width of back where it attaches is 25mm)